Pilgrims Projects • 269-945-5079 (Mon-Fri 9-5:00 p.m. E.S.T.)
3 Flute Design to eliminate chatter
For vintage-style pins and modern Martins
2 Inch Flute length and .313 max diameter.
Made in USA
5 Degree Tapered Bridge Pin Reamer #T7
3 Degree Tapered Bridge Pin Reamer #T8
Same design as above, but 3 degree taper.
For many Gibson and Gurian Pins
Ibex Crack Repair Splint Knife #T9
Silicon Bronze
Adjustable cutting depth to uniformly taper the crack.
When used with the Splint Former, crack repair is done par excellence!
Ibex Crack Repair Splint Former #T10
Ibex Crack Repair Splint Former
Forms a wedge -shaped splint .040 to 3/8 wide to precisely match the crack taper.
Instructions Included
Ibex Purfling Goove Cutter #T11
Twin blades adjust vertically and horizontally.
Use single blade for edge bindings, or both blades for .085" wide purfling channels.
Cast silicon bronze with hardwood handle.
Replacement Blades for Ibex Purfling Groove Cutter #T11A
Razor Sharp Tool Steel replacement Blades
Purfling Groove Cleaner #T12
Useful for cleaning out purfling grooves after cutting
Stainless Steel Blade with Hardwood Handle
Ibex Bridge Clamp #T23
A sturdy Aluminum Clamp with 1-1/2" max. opening and 6" throat depth, for gluing a bridge or brace through a soundhole.
Ibex Fret Rule #T30
Four basic scales on heavy guage stainless steel. Two Steel scales (25-11/32 and 24-27/32) and Two Classical scales (Standard Classic Flamenco 25-21/32, Spanish Long Pattern Classic 26-1/8).
Guitar Making Tools
Bridge Clamp Caul T67
This device is easy to set up and needs only a single extra clamp.
The Caul is 5-7/8" long and 1" wide, and has a slightly arched bottom to accommodate most bridges on flattop steel-string acoustic guitars.
Brace Repair Jack T68
This mini jack is a real time-saver for holding a cracked brace, a bridge plate or a crack repair cleat while the glue dries.
It has simple fingertip turnbuckle height adjustment. A "must-have" tool for the repair shop.
guitar, guitarmaking, guitar luthier, guitar tools
Need Something Special?
luthier tool
luthier supplies
luthier supply
luthier mercantile
luthier international
luthier merchantile
luthier school
luthier schools
luthier wood
luthier parts
luthier violin
wood making
archtop guitar
making building
tools supplies
acoustic guitar
tools repair
tools parts
making kits
making supplies
Router Bits for Binding T69
The special bushed bearings in this set match standard binding thicknesses (and more). An extra .012" built in, to compensate for the swelling of the binding and the wood fibers during gluing, and for glue thickness. The result is a near-flush joint with only minimal sanding required on the adjacent wood surface. Scraping the binding is usually unnecessary.
This item ships FREE Worldwide!
The set includes custom-bushed bearings for cutting channels for .040", .060", .075", .090", .100", .120" and .150" bindings, and for cutting a .200" ledge for Herringbone purfling. (1.02mm, 1.52mm, 1.90mm, 2.29mm, 2.54mm, 3.05mm, and 3.81mm bindings, and 5.08mm ledge for Herringbone.)
The super sharp carbide-tipped cutter has .925" (23.50mm) unbushed cutting diameter, a 1/4" (6.35mm) arbor to fit your shop router, and an allen screw for installing the bearings. Allen wrench and instructions are included.
